Despite my main computer went down, loots have been arriving non stop for the past week… now that my computer is fixed, it’s finally time to reveal the result of my Dollfie Dream Instrumentality Project. I borrowed the name “completion project” from Evangelion, straightly in a sense, trying to “rescue” the lovely Dollfie Dream from their original boxes and adopt them as my musumes!
Just who are the mysterious Dollfie Dream? You about to find out (not like my picture didn’t give them away lol).
After opening the boxes, the first layer we have…
Dollfie Dream Saber and her maid outfit!
The second layer we have…
Dollfie Dream Feena in her formal dress and Dollfie Dream Asuka French Maid version!
Here is a shot with all three of them lined up..
But that’s not without any setback, Saber arrived with her right eye popped out of her eye socket, but that’s easily fixable with a stick of blue tack since Dollfie’s eyeball are mean to be replacable to begin with.
And here is a photo of my musumes number 2, 3 and 4 lining up in front of their new home.
But that was not all, another Dollfie Dream that can’t wait to be my musume flew from Dolpa 21 After Event lottery (she even leapfrogged Dollfie Feito).
Since this is my first official Dollfie from Volks International directly, I might as well post a few more pictures of it. I would say Volks took extra care in packing her to avoid her eye popped out of socket like what happened to Dollfie Saber. Those of you who has been following my blog probably know who is due to arrive… you guessed it, it’s Dollfie Rin! She leapfrogged Dollfie Fate to become my fifth musume.
Opening the box reveal the extra bubble wrap the Volks put in to help stablize Rin in the box.
I am very pleased to see the extra care Volks put in place to help Rin arrive safely to her new home.
After dressing up Dollfie Escalayer, Dollfie Asuka, Dollfie Feena and Dollfie Saber, I am pretty confident to say I am getting good at dressing them up! Though dressing up my first musume for the very first time can be pretty scary since I didn’t know much about dressing up a Dollfie Dream before that. So I included a few pictures to show the steps I took to dress Rin up.
First, pantsu on then her knee high
Her knee high is kind of tight, it felt tighter than Asuka and Feena’s so work it slowly, bit by bit.
Next is her dress, unlike the rest of my musumes, Rin’s dress and her blouse are both held together by plastic buttons only, so feel free to snap them open.
But before you put her blouse on, be sure to pull out her hand first because it won’t fit through.
All dressed up now
Next up is to apply the wig stopper. I have search the Internet numerous time and I have yet to come across a site showing the wig stopper and how it’s meant to be used. So, here it is.
It’s got adhesive back on one side, feel like thin tack tape on the other and it’s meant to catch on to the wig cap to prevent it from slipping off. So I cut off two strips of it and apply them to her head. It’s stay on but it’s also easily pilled off so don’t have to worry about it.
It’s difficult to show how to apply the wig since I have to use both of my hands to do it, but the best way I found is to first line up where you want the front of the wig is and keep a finger on the back of the wig cap and just pull towards to back of her head. Be very careful not to let her hair got stuck in the wig stopper because it will get caught there and you could possibly ruin some of the hair if you are not careful.
Time for a group photo for my musumes…
Since I still haven’t gotten around to get sufficient lighting to take a serious photo session for my musumes, I will refrain from doing that and give each one of them a head shot for now…
In time, I shall try to find a better way to get a continuous light source so I can take better quality pictures instead of using the camera flash.
That’s about it for the Dollfie Dream, but that was not it for loot update. A couple PVC figures have sneaked in between, although there isn’t much wow factor to them, I do like to point out a few things on the new figures.
1/8 Senhime from Alter and 1/5 Uesugi Kenshin from Freeing have arrived recently!
There isn’t much to talk about Senhime since she has been reviewed numerous time across various blog sites. My focus here is on this Freeing Kenshin, probably the best PVC representation of Uesugi Kenshin we have to-date, plus a very impressive instruction for the cast off procedure is included.
Very impressive step by step instruction here, best one for cast off procedure I have seen.
I should point out her armor is not made from PVC, it’s got a shiny finish to it and it’s most likely injection molded. I should also point out that the armor doesn’t feel bulky like Griffon version of armor cast off.
However, due to my mobo breaking down recently, fixing it up and all the dollfie dream arrival; I just haven’t had time to sit down and do a review of this figure. Hopefully, things will finally settle down now that I have gotten my computer fixed up.
Similar Posts:
- Dollfie Dream Saber Alter II and Fate/Extra Saber Nero Pre-Order Schedule
- Dollfie Dream Saber Alter II and Fate/Extra Saber Nero Pricing and Specification
- Saber Alter And Fate/EXTRA Saber Dollfie Dream Official Gallery
- TYPE-MOON x Dollfie Dream Project Pre-Order Start
Holy bajeezus! You realize you have more Dollfies than Danny, right?? XD
Well… again I will state that I will never have one of these Dollfies around due to various reasons & circumstances
Once I have decided to give my top favorite bishoujo girls the dollfie dream conversion, the rest is pretty much history as I have already determined that must be done, and I just followed the steps to make it happen. But unlike Danny, I don’t get to adopt Dollfie Dream for free, so it’s unlikely that I will lead much longer.
Wow, you got them all and then some… Must have required some amount of cash. I’m still trying to even afford one. (TT.TT) Life’s unfair.
Well yes, it’s a huge sum of money. I have to cut back my impulse spending for a long time to justify this cash outlay.
So what’s the size of Rin’s head so I know what kind of cap to get ^^;
I also see that you have no body stocking on Rin! Don’t you want that on before you put on the clothes? ^^;
Syaoran, Rin’s knee high is too tight to fit something underneath it so I will have to resort into the body suit, I am doubtful that the whole body stocking will fit. But I am going to ask a few people about it. As far as the head size goes, I haven’t had the time to get them as the week has been hectic as hell with 4 dollfie, 2 computers arriving. I will post update here though.
Whoa! Cool to see them all put together.
You’ll have 6 when Fate arrives. Think you got Danny and me beat. Nice harem. ^_^
^_^ I know, I was overwhelmed by their presence too. It’s gone an unspeakable air around them. As I said before, I decided to give my favorite bishoujo girls the dollfie dream conversion. These 6 musumes each represent a different otaku divisions.
Escalayer: Eroge game oppai
Saber: Eroge game heroine/ sword fighter/ Eroge game maid
Rin: Eroge game tsundere/ Eroge game magic user
Feena: Eroge game princess/ dakimakura princess
Feito: Non Eroge magic user/ sword fighter/ office lady
Asuka: Non Eroge french maid
It’s highly unlikely my favorite bishoujo list will grow much longer so I probably won’t adopt many more dollfie in the future.
So when is Fate gonna arrive?
I think 5 of the dollfie there together is equivalent to half of my yearly salary. >_>
I request a shoot of saber in her maid outfit plz. xD
My room is in a rather messy state right now, with 4 new dollfie and 2 extra computer cases around. I have to do another serious house cleaning right now. Once I settle down, I am going to start snapping pictures left and right. Meido to Medido, symmetrical docking action, you name it, it will be done!
Hmm planning a lot of Dollfie photoshoots, eh? How about tentacles? XD
Tentacles will harm my musumes! They absolutely cannot come near them!
We shall see about that
lucky!!
What nice dollfies you have,I especially love Saber,so pretty~
where would I be able get a dollfie?I cant find any anywhere ^^;
ChibiKira, you cannot buy Dollfie normally. The only way to buy limited release Dollfie like Saber is through Volks lottery, you can look up information at http://www.volksusa.com
or try your luck in Yahoo Japan Auction. Good luck.
You’ve got quite the dollfie harem going on. As one who avidly collects Figmas I could see myself movie up to this level some day, though not for a while for various reasons. I really enjoy jointed figures and Dollfies are like the ultimate in that area. Looking forward to seeing more of your musumes and learning more about them so when I finally have the ability to acquire one I’ll know what I’m doing. The one I’d want the most at this moment in time is Saber Alter, but I’m pretty sure I’ll never have the chance to own her.
Indeed it has grown! I can find no words in the tongue of men to describe my feeling when I took them one by one and line up for a nice photo! They are all my favorite bishoujo and they are all here for my fatherly love!
Thanks Wolf! I’ll check back here every so often for body suit/cap info ^^ My Rin won’t ship till July so I got a while before I need to buy the accessories anyway ^^
Grats on your new daughters Wolf. I’m sure you’ll enjoy their company, and will look forward to seeing more photos of them in the future. All that’s missing is Fate…she’ll be arriving shortly right?
lol its so funny seeing a guy dress a doll up XP
Hi!!! Congratulations on you purchase!!! I really want to buy one of this dolls! Can you help me with prices for example, and if you can share with me the website where you buy them!!! THX